X-Cleaner vs traditional solutions
Our X-Cleaner descaling system does not require your heat exchanger to be dismantled; saving on time, labour and spare part costs. Compared to a standard acid pump solution, our unit heats up the descaling solution which, combined with our high quality chemicals, makes the job 50% to 300% quicker!
Our system neutralises the heat exchanger surfaces. This, together with the corrosion inhibitors contained in our acids, helps preventing long-term damage to your machinery.
How does scale affect the performance of a heat exchanger?
Scale has a bad thermal conductivity, so scale build-up makes heat exchangers less efficient. This means that more time, energy and flow is needed to obtain a certain exchange of heat. Scale and deposit build-up in heat exchangers lead to lower efficiency in heat transfer, causing:
Speak to our teamLoss of production
Can lead to significant production losses by reducing heat transfer efficiency and causing unscheduled downtime for cleaning and maintenance.
Damage to equipment
Can cause severe damage to equipment, leading to corrosion, overheating, and potential system failure due to increased pressure and reduced flow rates.
Higher energy costs
Accumulated deposits reduce thermal efficiency, forcing systems to consume more energy to achieve the desired temperature transfer.
Don't let scale impact your production
- Scale build-up is caused by minerals in water
- Temperature changes increase scale build-up
- Up to .1mm of scale can form within 6 months
- .1mm of scale can cause up to 33% inefficiency
- Hard water accelerates scale build-up
- Scale eventually leads to corrosion destroying your equipment
The X-Cleaner solution
- Tailored solution for each installation and problem
- Avoids opening or dismantling exchangers to clean them
- Recovers the system performance in hours, with minimum downtime
- Safe for all materials within the installation
- Important savings in man hours and labour
Common problems
Inefficient heat transfer/clogged heat exchangers can be detected by sub-optimal gauge readings (too high pressure/temp, flux is too low, etc). Without our X-Cleaner solution, your systems will be facing:
Speak to our teamScale
Corrosion
Biofilm
Sludge
Scale in your systems
Scale build-up is caused by minerals in water. Temperature changes increase scale build-up, up to 0.1 mm can form in just 6 months!!
Scale has a bad thermal conductivity, so scale build-up makes heat exchangers less efficient. In addition, scale is often associated with corrosion, eventually damaging the heat exchanger unit.
Heat exchanger performance
A heat exchanger needs energy to keep the temperature of the fluids according to the need of the operation. Heat Exchangers need to be kept in the best working conditions.
Get in touchA Heat Exchanger in optimal condition…
Requires less energy to operate…
Results in savings in your electricity bill!
Insufficient approaches to heat exchanger cleaning
There are numerous approaches to cleaning heat exchangers currently available on the market but most of these are costly, with significant downtime and do not tackle the problems sufficiently.
Contact usMechanical cleaning
Piece replacement
Acid de-scaling
X-Cleaner solution
X-Cleaner removes residues, restoring heat transfer efficiency. Our X-Cleaner programme offers a comprehensive solution to remove scale and other deposits from most types of heat exchanging equipment; allowing you to maintain your equipment at peak efficiency levels.
Get in touchOur Equipment
Our Chemicals
Our Expertise
Before
After
Scale removal with X-Cleaner
Without the X-Cleaner solution – your systems are facing scale, corrosion, sludge and biofilm build-up; resulting in drastically reduced efficiency and higher costs.
X-Cleaner solution – customer benefits
Reduced downtime
Water heating and high-performance chemicals make our system 50% to 300% quicker compared to alternative solutions.
Reduced risk
Well-proven neutralistion process and dedicated products avoid damage to the equipment being treated.
Full service
Avoids your staff direct handling of acids. Our service covers any requirement, including system follow-up and tracking.
Contact us
Our team are here for you. If you would like more information about NCH or any of the solutions, products or services we provide, please get in touch.
NCH Maintenance ile İletişime Geçin
+90 216 366 10 00 – 444 9 NCH (624) [email protected] Bizimle iletişime geçinDidn’t find what you need?
Take a look at our other application areas or contact a member of our team to discuss your needs further.
Explore all applications
